Magnaliner | Magnesium Oxide Board
Magnaliner™ is a multipurpose board for use internally or externally, in a wide variety of applications.
What is Magnaliner?
Magnaliner™ is 1100kg/m3 in density so can help with acoustic performance, it is also tested to EN 1716:2002 and 1182:2002 - A1 Non combustible.
Available in a choice of 6mm, 9mm or 12mm thick and a standard board size of 2400mm x 1200mm. Euroform can fabricate your required sizes. Delivery is available throughout the UK.
We have recently completed a series of racking tests which now allows Magnaliner to be used as a non-combustible timber frame sheathing board.
Typical Applications
- Internal/External linings
- Ceilings
- Fascias/Soffits
- Boiler backer
- Infill panels
- Partitions
- Sheathing board for timber frame construction
Benefits
- Seamless jointing system available
- Good acoustic performance
- Suitable for decoration (ask for details)
- Available in cut sizes and edge profiles for specialist applications
- Non combustible
Resistant to:
Technical Data
Technical Data| Density (average) | 1100 Kg/m3 |
| Product Tolerances | |
| Thickness | -0.20mm to +0.40mm |
| Width | -2.00mm to +2.00mm |
| Length | -2.00mm to +2.00mm |
| Squareness | 5.00mm on diagonal difference |
| Bending Strength | 13.7N/mm2 |
| Permissable Design | |
| Value | 3.4N/mm2 |
| Surface Alkalinity | 9.5pH |
| Thermal Conductivity | 0.124W/mk |
Bonding Agent |
|
| Fire Rating | BS 476 part 4 |
| Test Item | Unit | Test Result |
| Thickness Swelling | ||
| After 24 Hours Immersion | % |
0.2% |
| After Freeze/Thaw Test | % |
-0.1% |
| Moisture Exposure | ||
| Elongation Rate | % |
<0.9% |
| Water Absorption | % |
32% |
| Heat Exposure Deformation Rate | % |
<0.2% |
Freeze/Thaw Test
Frozen at -17.5°C +2.5°C continuously for over 16 hours. Kept frozen at -17.5°C for 4 hours and thawed by immersing in water at approximately 20°C. Maintained at a temperature of 20°C ± 3°C for 5 hours. Freeze and thaw cycle is repeated 10 times.
Test result: No cracking, disintegration, crumbling or stripping occurs on the board and it achieves the freeze/thaw value of 1.97%.
Fixing Details
Fixing DetailsEuroform Recommended Fixings We have the fixings to suit your application whether it is steel or a timber substrate. Fixings can be delivered nationwide with your panels or collected from our depot in Warrington. See table for fixings recommendations.
| Steel Substrate | Board Thickness | Screw Type |
| 0.7 - 1.5mm | upto 16mm | EMF1 4.8 x 45mm |
| 1.5 - 3.0mm | upto 16mm | EMF2 4.8 x 38mm |
| 4.0 - 10mm | upto 16mm | EMF3 5.5 x 65mm |
| Timber Substrate | Board Thickness | Screw Type |
| N/A | upto 20mm | ETF1 4.8 x 60mm |
| N/A | upto 20mm | ETF1 4.8 x 60mm |
For application of the panel as sheathing in timber frame, contact Euroform’s technical team for nailing details and locations.
