MagnaTile™ is an A1 non-combustible ceiling tile tested in accordance with EN 1182 & EN 1716 available in either 9mm or 12mm and with square or beveled edges.
- MagnaTile™ can be mechanically fixed to either timber or steel or laid into an existing ceiling grid system.
- MagnaTile™ is highly moisture resistant and can be used in semi-external applications. It has extensive testing to EN 12467 and has achieved catergory ‘A’ performance as materials intended for applications where they may be subjected to heat, high moisture and severe frost.
- MagnaTile™ is available in customer friendly small pack sizes, please contact your local distributor for further details.
|Density (average)||Dimensional Stability|
|825 Kg/m3 (+/- 50kg/m3)||<0.005%|
|Squareness||±2mm on diagonal difference|
|Surface Alkalinity||pH between 8 and 10|
|Odourless and bonding agent is free from formaldehyde|
|A1 non combustible to EN1716:2002 and 1182:2002|
|Standard sizes||Typical weight per m2|
|450 x 450 x 9/12mm||7.4kg - 9mm|
|595 x 595 x 9/12mm||9.9kg - 12mm|
|600 x 600 x 9/12mm||* Other special sizes available upon request up to maximum 2400 x 1200mm|
Where mechanical fixing method is required use jackpoint drylining screws at nominal 200mm centres.
Tiles should be supported around their perimeter (all 4 edges).
Fixings should be a minimum of 15mm from board edges and no nearer than 40mm from corners.
Bevel edge detail
MagnaTile™ ceiling tiles showing bevelled edges.