Promolis Adhesive
Promolis is a finishing product based on plaster intended for the finishing of partition walls built with gypsum blocks.
| • Standards: |
- European standard EN 12860. |
| |
| •Technical details: |
- Colour: white
- Substance: powder.
- Retraction (%): not significant. |
| |
| • Preparation: |
- Ratio: approximately 1 volume of water to 2 volumes
of powder.
- Sprinkle the powder into pure water and let this stand
for 5 to 10 minutes
- After this, mix the powder through the water until a strong homogeneous paste is obtained. |
| |
|
• Application:
|
- Apply using a spatula. Ensure the base surface is clean,
dry and free of dust before applying the finishing glue. |
| |
| • Important Notice: |
- When the adhesive starts hardening, do not try to add water
and mix together the mixture as the glue will have lost its
properties.
|
| |
| • Processing time: |
- Approximately 24 hrs.
|
| |
| • Temperature: |
- Do not use it below 5°C.
|
| |
|
| • Drying Time: |
- Approx 6 hours in normal conditions.
|
| |
| • Storage: |
- Approximately 12 months in the original sealed package.
Store the bags in a way which ensures they are dry and
do not have direct contact with the ground.
|
| |
| • Precautions in use: |
- When preparing try to avoid producing dust when opening
bags or adding powder to the water.
- Contact with skin: wash with pure water.
- Dust in eyes: irrigate immediately and thoroughly with clean
water.
|
|
 |
