Ufoil® | Polyethylene Bubble Insulation for Dryling and Cavity

What Is | Specification | Roofs | Walls | U-value | Request A Sample
Ufoil from Euroform - Our Ufoil products increase the thermal capacity within the given application thus reducing the U-Value (thermal transmittance). Ufoil not only offers a higher thermal resistance with its vapour resistance in excess of 500MNsg-1 this would then be considered as a vapour control layer as defined in section 1 of BS2520:1989 (1995). Our Ufoil products increase the thermal capacity within the given application thus reducing the U-Value (thermal transmittance).

Ufoil not only offers a higher thermal resistance with its vapour resistance in excess of 500MNsg-1 this would then be considered as a vapour control layer as defined in section 1 of BS2520:1989 (1995).

Contact Us
Euroform Products Ltd, Unit 2, Lyncastle Road, Appleton, Warrington WA4 4SN
Tel: +44 (0) 1925 860999 Fax: +44 (0) 1925 860066 Email: sales@euroform.co.uk


Site Map +
Click to reveal
Due to our policy of continuous development we reserve the right to change design and specifications without prior notice. Euroform Products Limited does not accept responsibility for any loss as a result of any company or person relying on material on this website, or for any mistakes. Although every care is taken to ensure accuracy, this website is a general guide and specific technical advice is recommended before proceeding with any transaction. Specific fact sheets, or, technical advice is available from Euroform technical department 01925 860999. Copying or reproducing any part of this website in any manner is not permitted without prior written consent from Euroform Products Limited.

Privacy Policy | Terms & Conditions

Part of SIG plc - Registered Office: Euroform Products Limited, Hillsborough Works, Langsett Road, Sheffield, S6 2LW Registered Number: 2945504