Ufoil® | Polyethylene Bubble Insulation for Dryling and Cavity

What Is | Specification | Roofs | Walls | U-value | Request A Sample
Ufoil walls - Timber / Modular Timber / Modular

Ufoil 1bd/a-1 has been specially adapted for Timber/Modular Frame structures and will significantly improve thermal insulation reducing the U-Value (thermal transmittance) of new structures. 1bd/a-1 Timber/Modular Frame application has been specially adapted to release moisture, which may build up between the sheathing board and polyethylene bubble. The polyethylene structure has been modified to allow any unexpected moisture to flow between the bubbles and disperse accordingly. 1bd/a-1 is
applied horizontally ensuring minimum overlaps of 75mm up against the sheathing board and with the aluminium foil facing the cavity this then maximises the thermal performance of the product.

Contact Us
Euroform Products Ltd, Unit 2, Lyncastle Road, Appleton, Warrington WA4 4SN
Tel: +44 (0) 1925 860999 Fax: +44 (0) 1925 860066 Email: sales@euroform.co.uk


Site Map +
Click to reveal
Due to our policy of continuous development we reserve the right to change design and specifications without prior notice. Euroform Products Limited does not accept responsibility for any loss as a result of any company or person relying on material on this website, or for any mistakes. Although every care is taken to ensure accuracy, this website is a general guide and specific technical advice is recommended before proceeding with any transaction. Specific fact sheets, or, technical advice is available from Euroform technical department 01925 860999. Copying or reproducing any part of this website in any manner is not permitted without prior written consent from Euroform Products Limited.

Privacy Policy | Terms & Conditions

Part of SIG plc - Registered Office: Euroform Products Limited, Hillsborough Works, Langsett Road, Sheffield, S6 2LW Registered Number: 2945504