Ufoil
BDA insulation comprises of polyethylene bubble which
has aluminium to either one face or two faces.
There is also a choice of two types of bubble - single
bubble or double:
 |
2BD/A
Foil
to both sides
With
two layers of polyethylene bubble
|
|
|
|
 |
1BD/A
Foil
to both sides
With
one layer of polyethylene bubble |
|
|
|
 |
1BD/A-1
Foil
to one side
With
one layer of polyethylene bubble |
|
|
|
Available in two specifications - Class '1' Surface
Spread of Flame and Class '0' to Building Regulations.
Ufoil
insulation works on the principles of reflecting
upto 95% radiant heat.
Ufoil
thermal performance is unaffected by moisture
and condensation. Ufoil has a vapour resistance in excess
of 500MNsg and will therefore provide significant resistance
to the passage of water vapour, and would be considered
a vapour control layer as defined in section 1 of BS5250:1989
(1995).
The
Ufoil range offers a choice of 1BD/A,
2BD/A or 1BD/A-1 all can be offered in Class '1' or
Class '0'. Depending upon the application and requirements
Euroform can supply you their most suitable product
and will help with U-Value Calculations and technical
information.
| Contact
Us |
| Euroform Products
Ltd, |
The
Heliport, Lyncastle Road, Appleton, Warrington WA4 4SN |
|
| Tel: +44
(0) 1925 860999 |
Fax: +44
(0) 1925 860066 |
Email: sales@euroform.co.uk |
Site Map
Due
to our policy of continuous development we reserve the right to change
design and specifications without prior notice. Euroform Products Limited
does not accept responsibility for any loss as a result of any company
or person relying on material on this website, or for any mistakes. Although
every care is taken to ensure accuracy, this website is a general guide
and specific technical advice is recommended before proceeding with any
transaction. Specific fact sheets, or, technical advice is available from
Euroform technical department 01925 860999. Copying or reproducing any
part of this website in any manner is not permitted without prior written
consent from Euroform Products Limited. |
Registered Office: Euroform Products Limited, Hillsborough Works, Langsett Road, Sheffield, S6 2LW Registered Number: 2945504 |
|
