Using modern methods of construction,
Versachimney can be pre-fabricated off-site, saving
time and money. There are many benefits to using
pre-fabricated components, for instance, high
specification construction and a quality controlled
uses high performance materials, many of which
have been tested or approved as below:
particleboards - Specifications - Part 1:
particleboards - Specifications - Part 2:
Requirements for OPC-bonded particleboards
for use in dry, humid and exterior conditions
476 PART 6
tests on building materials and structure.
Method of test for fire propagation.
476 PART 7
of test for classification of the surface
spread of flame.
4315 PART 2
of test for resistance to air and water penetration.
Permeable walling constructions.
of practice for of condensation in buildings.
5628 PART 3
of practice for use of masonry, materials
and components, design & workmanship.
6399 PART 2
for buildings. Code of practice for windloads.
8000 PART 5
on building sites, code of practice for carpentry,
joinery and general fixings.
of practice for assessing exposure of walls
to wind driven rain.
|| Code of practice for design of non-load bearing
external vertical enclosures of buildings.
chimneys manufactured in a quality controlled
Products Limited recommend that further details
are requested before any transaction is entered
into, to confirm the suitability of Versachimney
in specific applications.
flexibility in design is vast. Euroform can offer
a complete design service incorporating any special
features or period features into the chimney.
is lightweight and can be designed to any specification
required. A working chimney can be incorporated
into this pre-manufactured type if necessary.
Full kit of parts is supplied including plinth,
all mechanical fixings, mortar additives for on-site
mortar mix and capping with pot.
can be real brick, real stone or rendered. The
perfect brick/stone match can be achieved using