Versafloor Cement Bonded Particle Board

About Versafloor

Versafloor is a cement bonded particle board manufactured to BS EN 634-1 and BS EN 634-2, intended for internal use which has very high levels of performance in the presence of moisture and has high resistance to fire. Versafloor is CE marked, in accordance with EN 13986, and complies with the general requirements as listed in EN 634-1.

The construction industry now requires as many components as possible to be supplied in a finished form, minimising any further work on site. This particularly applies to the Modular and Volumetric construction industry where modules are of a repetitive sizing for such constructions as: prisons, hospitals, restaurants, petrol stations, hotels.

Euroform have developed for this market Versafloor factory finished high performance flooring systems. Versafloor is manufactured using Versapanel cement bonded particle board which is a high performance building material having the properties of fire resistance, high performance in the presence of moisture and high acoustic performance.

Features & Benefits

  • Fire resistance
  • Acoustic performance
  • Rot proof
  • Non toxic
  • Resistance to compression
  • Resistance to fungus & mould growth
  • Containing no fibres or hazardous volatiles
  • Can be machined to precise measurements

Applications

Versafloor can be used in any number of applications, including but far from limited to:

  • Floor renovations
  • Modular flooring systems
  • Mezzanine floors

Versafloor has been used successfully in:

  • Apartments
  • Offices
  • Hospitals
  • Restaurants
  • Petrol stations
  • Hotels
  • Prisons

Specification

Panel Sizes
Versafloor panel sizes can be produced to suit client requirements and layouts but standard stock sizes are 1200 x 600mm and 1200 x 1200mm.
Panel Thicknesses
18mm, 19mm, 20mm, 22mm, 24mm, 25mm, 28mm and 32mm.

Versafloor is available:

  • Unsanded (Type 001)
  • Calibrated (Type 002)
  • Primed/Sealed (Type 003)
Type 001
Unsanded Versafloor can be supplied with the standard unsanded finish with square edge or tongue and groove applied to two or four edges. Care must be taken when using this specification as there will be a thickness tolerance of up to +/- 1.5mm.

Note: This range can also be supplied with a factory applied grey primer/sealer to both faces which is highly recommended for environments where the product may take on moisture during a build process or in its construction life. The top surface is white and the bottom surface is grey.

Type 002
Calibrated Versafloor has been factory calibrated and all thicknesses have a thickness tolerance of +/- 0.3mm. This range can also be supplied square edge or with tongue and groove applied to two or four edges. This product range is suitable for application of fine thickness overlays such as vinyl flooring and thin carpet tiles.
Type 003
Primed/Sealed Versafloor that has been factory calibrated and then has a factory applied primer/sealer to reduce uptake of moisture when used in damp or wet conditions, the thickness tolerance is +/- 0.5mm. The top surface is white and the bottom surface is grey, the application of this primer/sealer can prevent up to 80% of moisture uptake.

This range can also be supplied square edge or with tongue and groove applied to two or four edges. This primer/sealer is highly recommended for environments where the product may take on moisture during a build process or in its construction life. The top surface is white and the bottom surface is grey.

Testing

  • Manufactured to BS EN 634-1 and BS EN 634-2
  • BS 476-6 & BS 476-7: Class 0 Building Board
  • EN 13501-1: (B-s1,d0 Versapanel®), (Bfl-s1 Versafloor®)

Datasheets

Download our Versafloor Brochure

To ensure you have the latest version of this document call 01925 860 999.

Enquire About Versafloor

01925 860 999

Have questions about Versafloor?
Let’s arrange a consultation.

More Case Studies from Euroform

Euroform’s products, expertise and outstanding technical support in action.

Premier Inn, Southend-on-Sea

With amber and yellow Met Office alerts still fresh in people’s minds, ALD turned to Euroform’s Rendaboard when they were looking for a robust render carrier panel for their Southend-on-Sea Premier Inn project. What’s more, Rendaboard was also compatible with their...

read more

Download our Versafloor Brochure

To ensure you have the latest version of this document call 01925 860 999.

About Euroform

Since 1995, Euroform has been successfully developing, fabricating and supplying materials for the construction industry. In that time, they have developed and cemented a reputation for innovation, expertise and reliability.

Address

Euroform
Unit 2, Lyncastle Road, Appleton,
Warrington, WA4 4SN

Tel: +44 (0) 1925 860999
Fax: +44 (0) 1925 860066
Email: Sales@euroform.co.uk