Floors
& Ceilings Overview
Many
prestigious contracts have been carried out using this
material for a variety of reasons, combining the properties
of Versapanel® to provide a high performance
ceiling construction.
| • |
Class
'O' Fire Resistance |
| • |
Easily
Machined To Produce Profiles |
|
| • |
Wide
Range Of Surface Finishes |
| • |
Moisture
Resistance |
|
| • |
Acoustic
Performance |
| • |
Flexibility
In Design |
|
Moulded
Panels
Versapanel® can be machined to create
a fielded effect or have mouldings in hard or soft wood
applied to the surface.
Ceiling
Grid
Versapanel® can be supplied cut to
size, bevel or square edged and with a variety of surface
treatments.
Specific
High Performance Systems
Versapanel® systems are used where
there is a requirement for a high performance against
any of the following criteria: fire/moisture/humidity/acoustics/impact.
Versapanel®
is also available in standard sizes of 600 x 600mm or
1200 x 600mm. Available with square edge (for lay in
grid system) or bevelled edge (for face fixing) they
offer a class 'O' fire resistance with a class '1' spread
of flame to BS476 Part 7. The density of Versapanel®
offers excellent airbourne sound reduction (31dB for
a single tile of 10mm).
Versapanel®
For Flooring
The combination of cement and wood produces a material
which is an ideal solution for high performance flooring
using traditional and new construction techniques. Versapanel®
is being currently used worldwide in a number of different
flooring applications, for various reasons, depending
on what particular criteria is important: fire resistance
- acoustic performance - resistance to moisture - strengthening
of construction - eliminating wet trades or where there
is a need to use a material that will give a higher
performance than traditional methods.
For
full construction details and relevent data on the above
systems please contact Euroform Products Limited.
| Contact
Us |
| Euroform Products
Ltd, |
The
Heliport, Lyncastle Road, Appleton, Warrington WA4 4SN |
|
| Tel: +44
(0) 1925 860999 |
Fax: +44
(0) 1925 860066 |
Email: sales@euroform.co.uk |
Site Map
Due
to our policy of continuous development we reserve the right to change
design and specifications without prior notice. Euroform Products Limited
does not accept responsibility for any loss as a result of any company
or person relying on material on this website, or for any mistakes. Although
every care is taken to ensure accuracy, this website is a general guide
and specific technical advice is recommended before proceeding with any
transaction. Specific fact sheets, or, technical advice is available from
Euroform technical department 01925 860999. Copying or reproducing any
part of this website in any manner is not permitted without prior written
consent from Euroform Products Limited. |
Registered Office: Euroform Products Limited, Hillsborough Works, Langsett Road, Sheffield, S6 2LW Registered Number: 2945504 |
|
